We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello everyone... Can anyone teach me how to change the programme as this is my 1st time using it.... sorry...
void init_serial (void){/*Initialize Serial Interface*/ PINSEL0 = 0x00000005;/* Enable RxD0 and TxD0 */ U0LCR = 0x83; /* 8 bits, no Parity, 1 Stop bit */ U0DLL = 97; /* 9600 Baud Rate @ 15MHz VPB Clock */ U0LCR = 0x03;/* DLAB = 0 */
Sorry, this is a forum for discussing questions and comments about Keil products: http://www.keil.com/forum/
It's not a tutor, I'm afaraid, and it's not practical to teach programming just with forum posts.
For a start, you need to specify which particular toolset you are using.
If you go to the 'Products' page for your chosen toolset, you will find a book list - that'd be the place to start!
http://www.keil.com/product/
"Peter young" seems to be working on exactly the same code: http://www.keil.com/forum/docs/thread10592.asp
Are you in the same class?