We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi this is Vishal Khurana a new buddy to keil.... I downloaded many evaluation versions from keil .com like C-166 version 6.08 and C-251 version 4.5 and C-51 version 8.08. In above all when i install them only C-51 is working rest all are not working . when i open a project it says missing tools.ini file and microvision 3 has encountered a problem and has to be closed. I asked for original C.D from keil by post evaluation version only.in dat C.D also i am facing same problem only C-51 is working .plz help me out from where i can get evaluation version downloaded which is working for c-166 n C-251
first i used C-51 and after that i see C-251 it has more added features as compared to C-51 in evaluation version so i installed it but it gives dat message with both C-166 and C-251 Missing tools.ini file plz give me the link where i can get evalution version which is uncorrupted plz help!!!!!
But even if you can somewhere find an evaluation that has 10 times the amount of features as the C-51, you still have to settle for a software that supports the indented processor.
Select processor first, and then decide what tools to use.
i see C-251 it has more added features as compared to C-51 in evaluation version
Really? Can you summarize what the added features are?
Jon
Well, there is a digit "2" between the dash and the digit "5". Any IDE with a higher model number has to be a more full-featured product :)