DARMST9.dll

All:

I've been playing around with some of the RTL (RL-ARM) code examples and running in the simulator. All works well with most examples (generic or based on ARM7 stuff). But, when I try to use the Simulator to run STR9 (ARM9) code, I get a flurry of error messages that all seem to point back to a missing DLL called DARMST9.dll. Apparently it has to do with dialog boxes required for simulation.

Anyway, I've searched the \Keil\Bin directory (and every other directory on my machine) and there is definitely not a DARMST9.dll anywhere to be found.

Interestingly enough, if I use Help|About uVision,then I get the following information:

IDE-Version:
µVision3 V3.33
Copyright (c) Keil Elektronik GmbH / Keil Software, Inc. 1995 - 2006

License Information:
Richard McCoy
Oceaneering International
LIC=BUUSP-M1ED3-3EQH9-MYL30-WVZY4-PV1SI

Tool Version Numbers:
Toolchain Path: BIN30\
C Compiler: ARM/Thumb C/C++ Compiler, RVCT3.0 [Build 942] for uVision [Full]
Assembler: ARM/Thumb Macro Assembler, RVCT3.0 [Build 942] for uVision [Full]
Linker/Locator: ARM Linker, RVCT3.0 [Build 942] for uVision [Full]
Librarian: ARM Archiver, RVCT3.0 [Build 942] for uVision
Hex Converter: ARM FromELF, RVCT3.0 [Build 942] for uVision [Full]
CPU DLL: SARM.DLL V3.02a
Dialog DLL: DARMST9.DLL
Target DLL: BIN\UL2ARM.DLL V1.20a
Dialog DLL: TARMST9.DLL V1.00

So my Help file seems to think there is a DARMST9.dll but I'll be darned if I (or my simulator!) can find it.

Does anyone know where I can get this file?

Thanks In Advance,

-=Rich=-