• State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 22 subscribers
  • Views 1037 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

serial acess to code memory

Manoj kumar.r

im facing problem to acess the data bytes serially to the code memory.if it is possible give me a solution.

Parents
  • 0 in reply to Manoj kumar.r

    "i can write to the code memory statically."

    No, you can't.

    "example

    unsigned char code array[10]={10,20,30------}

    this is working"

    That's because the data is loaded into your PROM by your PROM programmer - it is not loaded at run-time by the processor.

    "wen i write the databytes from serial port it is not possible why?"

    I explained that to you in my previous post.

Reply
  • 0 in reply to Manoj kumar.r

    "i can write to the code memory statically."

    No, you can't.

    "example

    unsigned char code array[10]={10,20,30------}

    this is working"

    That's because the data is loaded into your PROM by your PROM programmer - it is not loaded at run-time by the processor.

    "wen i write the databytes from serial port it is not possible why?"

    I explained that to you in my previous post.

Children
No data