• State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 21 subscribers
  • Views 1689 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RTL: Flash File System

Stefan Reto Gygax

Hi

I'm using flash device.

Configuration:
Sector size 256 byte.

The fuction ffree() returns always 0 byte.

Is this possible?

Parents
  • 0 in reply to Stefan Reto Gygax

    Hi Stefan,
    my configuration:

    Read/Write Memory Areas
on-chip:
IRAM1 Start:0x4000000 Size:0x8000

In the file "AFS_Config.c":
#define RAM_DEV     1
#define RAM_BADR    0x04008000
#define RAM_SIZE    0x010000
#define RAM_NSECT   8

    as you can see, there is no overlap. Stefan, are your test project work in simulator? Mikhail

Reply
  • 0 in reply to Stefan Reto Gygax

    Hi Stefan,
    my configuration:

    Read/Write Memory Areas
on-chip:
IRAM1 Start:0x4000000 Size:0x8000

In the file "AFS_Config.c":
#define RAM_DEV     1
#define RAM_BADR    0x04008000
#define RAM_SIZE    0x010000
#define RAM_NSECT   8

    as you can see, there is no overlap. Stefan, are your test project work in simulator? Mikhail

Children
  • 0 in reply to Mikhail S.

    Hi Mikhail

    Yes, application with RAM drive works on target and in simualtor.

    Have you tryed with smal RAM size configuartion yet?
    How is the memory layout of your ARM?

    Stefan

  • 0 in reply to Stefan Reto Gygax

    Hi Stefan,

    Memory layout for the STR912FW44 is:

    ROM bank0 0x0 0x7FFFF (size 0x80000)
ROM bank1 0x80000 0x87FFF (size 0x8000)
RAM 0x4000000 0x4017FFF (size 0x18000)

    Stefan, can you send me your test project with file system, so I can try it on simulator and compare with my project. Do not send lib files, just zip up your project with simple main() that you already post here. My address: mikhail.sokolov@baselineindustries.com

    thanks
    Mikhail