Hi there!
I have some problems with CAPCOM timer. It was configured: CPU clock - 40 MHz prescaler - module clock / 8 Timer0 overflow (usec) - 100 Timer 0 reload register - 0xFE0C
On digital oscilloscope I can see ~9.615 kHz, not 10 kHz.
Can anyone explain this problem?
Some info: _MCTC1 EQU 1 _RWDC1 EQU 0 _MTTC1 EQU 0
Hi Chris!
I've done as you said. It really works! Even without stopping CAPCOM timer!
You are most usefull man in this forum, thanks a lot.