• State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 22 subscribers
  • Views 2050 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Get CPU's machine cicles from the C Scripting interface

marius cristian voicu

Hi all,

Is it possible to get the CPU's machine cicles from a C script? I'm using the C Scripting feature of the uVision3, and I need to syncronise the scripts with the simulation. For example, i need to have a C script that will togle a pn after a specific number of machine cicles.... Is it possible?

Best regards,
Marius

Parents
  • 0 in reply to erik malund

    Erik, if he is using such a derivative, he can make use of my post. Or even if he is using different system clock and timer clock, he can just calculate the ratio between the two clocks and use the same procedure to get the number of sysclks.

    Anyway, thanking for reminding me this point.

Reply
  • 0 in reply to erik malund

    Erik, if he is using such a derivative, he can make use of my post. Or even if he is using different system clock and timer clock, he can just calculate the ratio between the two clocks and use the same procedure to get the number of sysclks.

    Anyway, thanking for reminding me this point.

Children
No data