• State Not Answered
  • Locked Locked
  • Replies 20 replies
  • Subscribers 21 subscribers
  • Views 2996 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

settng up rs232 variable

phil Jones

Hi, can anyone tell me how i would set up a variable that expects a certain amount of data to be received through rs232.

i.e. to receive 18 bytes of data only once the the rx pin has been set to input.

thanks guys

Parents
  • 0 in reply to erik malund

    Well as you seem to respond to most posts i am presuming you are forum moderators employed by keil?? if not then i am truly greatful for your help. the configuration() etc just set up the nrf24e1 CS and CE, and in response to Dan, we are not the same person but are working on the same project......im not that immature.

Reply
  • 0 in reply to erik malund

    Well as you seem to respond to most posts i am presuming you are forum moderators employed by keil?? if not then i am truly greatful for your help. the configuration() etc just set up the nrf24e1 CS and CE, and in response to Dan, we are not the same person but are working on the same project......im not that immature.

Children
No data