• State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 22 subscribers
  • Views 873 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AT89C52

Arun V

hi
can anybody plz tell is there is an ISP for atmel 89c52 TQFP package...b'coz how will i program it one it si solrded in the ckt board..and ididnt find any adapter for converting 40 pin DIP to tqfp....i find dip to PLCC

Parents
  • 0 in reply to Arun V

    Hi,

    Atmel's datasheet says it has "8K Bytes of In-System Reprogrammable Flash Memory".
    You may want to look at using FLIP from Atmel if you still need to reprogram the chip once it has been soldered to the board, or now you have the adaptor have you solved your problem?

    Mark.

Reply
  • 0 in reply to Arun V

    Hi,

    Atmel's datasheet says it has "8K Bytes of In-System Reprogrammable Flash Memory".
    You may want to look at using FLIP from Atmel if you still need to reprogram the chip once it has been soldered to the board, or now you have the adaptor have you solved your problem?

    Mark.

Children