Hello, I'm using a PhyCore 167HSE with a C167CSL40M. I have on the board a memory EEPROM 24C08 which is connected with I2C. The problem is that the C167CS haven't I2C register, So how can I read, Write in this EEPROM? Help me please it's very important Thank you Benoît CHARBONNEAU
Go to the I2C section of this website - there's an example on software simulated I2C (it's an 8051 example, but you should be able to work with that): http://www.keil.com/i2c/