This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Arm Bootloading

Is there any code examples dealing with using the usb port and loading a application from a bootloader?

I also understand P0.14 needs to be low.

Thanks

0 Rene Don over 19 years ago

You're welcome!
Cancel
Vote up 0 Vote down

Cancel
0 Mike Wright over 19 years ago in reply to Rene Don

OK, Let me restate my question.

I am struggling with using the bootloader for arm. In the interrupt vector's I believe we can jump to the bootloader code.

Do we need to assign that location or is there one already set aside?

Thanks
Cancel
Vote up 0 Vote down

Cancel
0 Keil Software Support Intl. over 19 years ago in reply to Mike Wright

There is no bootloader code from ARM itself. To get serious answers, please state with device you are using and where you got the boot loader code from.
Cancel
Vote up 0 Vote down

Cancel
0 Viktor Bucher over 19 years ago in reply to Mike Wright

Here you can find a some help

http://cq.cx/dl/at91sam7sXXX.txt
Cancel
Vote up 0 Vote down

Cancel
0 Mike Wright over 19 years ago in reply to Viktor Bucher

Thank you Viktor.
Cancel
Vote up 0 Vote down

Cancel