i tried to send data, through serial data communication, from one Microcontroller[Atmel 8052 - AT89c52] to another Microcontroller[Atmel 8052 - AT89c52] and back to the source Microcontroller and then display the data on a LCD[16x2]. both the Microcontrollers have 12Mhz crystal and the baud rate is 2,400, and i have calculated the reload value for TH1 in mode 2[auto-reload mode] as, 256-[12E6/(32 x 12 x 2400)]=242.98, which is rounded off to the nearest integer 243. By doing this i am not getting the expected result. the output on the LCD is some junk value[looks v.weird]. what could b the problem???
what could be the problem??? That the wind was blowing from the west. as good a guess as any based on the information you are NOT giving. Erik