Hi, I am using the Keil uVision 2 software to develop a firmware driver. I have one technical related to the sbit definitions. Lets say i have couple of sbit definitions as follows: sbit JTAG_TDO = 0xB0+0; sbit ALT_JTAG_TDO = 0x80+0; In the course of program execution, based on some condition I want JTAG_TDO point to the ALT_JTAG_TDO pin so that whatever i write to JTAG_TDO gets written to ALT_JTAG_TDO at the port address 0x80+0 instead of the original 0xB0+0. I tried doing &JTAG_TDO = &ALT_JTAG_TDO and that raised a compiled error. Please let me know how to dynamically change the port pin addressing?
The address is fixed at startup and then based on a vendor request it is set to a new one and it will stay way for rest of the program life. After the indirection happens in the vendor request I wll then just use the JTAG_TDO to read and write values in a different function.