• State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 22 subscribers
  • Views 2063 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

87C552 PWM assemblly code

Toby Mole

I am using Keil 2 to run a program (a servo driven robotic arm) for the 87C552, I downloaded an example for the PWM usage from Keil.com, in C which works grand, but the compiler does not recognise any PWM refernces in assemblly.

Why is this ?

Is there any way around it?

Parents
  • 0 in reply to Andy Neil

    Apologies for my lack of experience in programming grammar and terminology.
    What you specified in you last post is correct
    Here are the errors:

    Build target 'Target 1'
assembling test.a...
test.a(20): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(56): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(60): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(61): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(62): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(63): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(64): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(193): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(197): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(201): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(205): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(209): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(213): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(217): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(221): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(225): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(229): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(266): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(280): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(307): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(309): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(314): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(316): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(340): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(343): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(346): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(349): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(352): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(355): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(358): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(361): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(364): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(367): error A45: UNDEFINED SYMBOL (PASS-2)
Target not created
    Basically any use of the PWM registers in code produces error A45

Reply
  • 0 in reply to Andy Neil

    Apologies for my lack of experience in programming grammar and terminology.
    What you specified in you last post is correct
    Here are the errors:

    Build target 'Target 1'
assembling test.a...
test.a(20): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(56): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(60): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(61): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(62): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(63): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(64): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(193): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(197): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(201): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(205): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(209): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(213): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(217): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(221): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(225): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(229): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(266): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(280): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(307): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(309): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(314): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(316): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(340): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(343): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(346): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(349): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(352): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(355): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(358): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(361): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(364): error A45: UNDEFINED SYMBOL (PASS-2)
test.a(367): error A45: UNDEFINED SYMBOL (PASS-2)
Target not created
    Basically any use of the PWM registers in code produces error A45

Children
  • 0 in reply to Toby Mole

    If I add an include into the code (reg51.h)
    more errors are generated on top of the others, here are the new ones:

    Build target 'Target 1'
assembling test.a...
C:\KEIL\C51\INC\REG51.H(10): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(11): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(12): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(13): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(14): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(15): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(16): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(17): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(18): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(19): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(20): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(21): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(22): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(23): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(24): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(25): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(26): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(27): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(28): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(29): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(30): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(35): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(36): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(37): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(38): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(39): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(40): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(41): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(44): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(45): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(46): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(47): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(48): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(49): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(50): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(51): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(54): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(55): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(56): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(57): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(58): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(59): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(62): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(63): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(64): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(65): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(66): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(69): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(70): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(71): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(72): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(73): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(74): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(75): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(76): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(79): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(80): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(81): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(82): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(83): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(84): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(85): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
C:\KEIL\C51\INC\REG51.H(86): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL

  • 0 in reply to Toby Mole

    If I include reg552.h instead, I get only the second set of errors

    C:\KEIL\C51\INC\REG552.H(10): error A10: ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL
    and not the original
    test.a(367): error A45: UNDEFINED SYMBOL (PASS-2)

  • 0 in reply to Toby Mole

    All signns point to you having fraternal twins in your .a51 code both the 'default' SFRdef and, when added the 552 SFRdef.
    I do not know about using the 'canned' versions, but I need to insert
    $NOMOD51
    Before including my SFR definition file in .a51 modules.

    Try it

    Erik

  • 0 in reply to erik malund

    "I need to insert
    $NOMOD51
    Before including my SFR definition file in .a51 modules."

    The A51 Assembler has the standard 8051 registers & SFRs built-in.
    Therefore, you don't need an include file if all you use is those "standard" symbols.

    Obviously, if you then include a file which also defines those "built-in" symbols, you will get an error like "ATTEMPT TO DEFINE AN ALREADY DEFINED SYMBOL!"

    The $NOMOD51 directive removes the built-in definitions:
    http://www.keil.com/support/man/docs/a51/a51_nomod51.htm

    Note that C51 does not predefine any SFRs.

  • 0 in reply to Andy Neil

    Wow thanks guys
    I am using

    $NOMOD51
$INCLUDE (REG552.H)
    right at the start of the code (is that right?)
    and its assembled beautifully.
    know to see if I can remember how its supposed to run, I wrote some of it about 5 months ago!

  • 0 in reply to Toby Mole

    yeeha :D
    Big one to ya guys

  • 0 in reply to Toby Mole

    know to see if I can remember how its supposed to run, I wrote some of it about 5 months ago!
    No problem, you commented it beautifully - right?

    Erik