This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LED Brightness contorl with ADuc812

Hi

Anyone got a sample code for controlling LED's brightness with ADuc812 (and a potentiometer)? LED should blink very rapidly by pulse width modulation.

Thanks in advance.

Mark

Parents

0 Stewart J Cort over 20 years ago in reply to Mark Bizloeb

Also, the data sheet for the ADuC812 should tell you how to set up and operate the PWM.

You'll need to read up on the AtoD converter as well, in order to "read" the pot.

You can find the data sheet at http://www.keil.com/dd/docs/datashts/adi/aduc812_ds.pdf

There are some example programs at http://www.keil.com/dd/chip/3007.htm
Cancel
Vote up 0 Vote down

Cancel

Reply

0 Stewart J Cort over 20 years ago in reply to Mark Bizloeb

Also, the data sheet for the ADuC812 should tell you how to set up and operate the PWM.

You'll need to read up on the AtoD converter as well, in order to "read" the pot.

You can find the data sheet at http://www.keil.com/dd/docs/datashts/adi/aduc812_ds.pdf

There are some example programs at http://www.keil.com/dd/chip/3007.htm
Cancel
Vote up 0 Vote down

Cancel

Children

No data