• State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 22 subscribers
  • Views 1769 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Flash tool for programming on chip flash on ST10F163 microcontroller

Naina K

Hello,

I am using a 16-bit micro controller ST10F163 from ST Microelectronics for my project. It has 128KB on chip flash. I want to download my application on flash. I searched on the net and found a flash tool Flash166.exe for ST10F163 to program the flash. But I am facing some problems while programming. It is saying "Timeout,boot mode not active" though I have set the hardware in to boot loader mode. I am working on one more project where I use ST10F269 microcontroller from ST. There I am using ST10Flasher tool to program the onchip flash. There I dont have any problems in programing. So I would like to know if there is any other tool/utility for programming the flash in ST10F163 other than Flash166.exe.

Thanks & Regards,

Naina

Parents
  • 0

    Hello,
    if I well remember, the C163F bootloader was in Flash, not in a special boot rom like other C166 family members, so maybe your chip has been previously erased and the original bootloader has been cancelled.
    Please check your ST10F163 manuals...
    Bruno

Reply
  • 0

    Hello,
    if I well remember, the C163F bootloader was in Flash, not in a special boot rom like other C166 family members, so maybe your chip has been previously erased and the original bootloader has been cancelled.
    Please check your ST10F163 manuals...
    Bruno

Children
No data