i'm trying to create an array of structures but when i make more than a handful my robot doesn't work. so in main.h i have
typedef struct SPid { int dState; // Last position input int iState; // Integrator state int iMax, iMin; // Maximum and minimum allowable integrator state int desired_value; // the desired value the PID should converge upon float iGain, // integral gain pGain, // proportional gain dGain; // derivative gain }SPid; extern SPid vel_Gains[];
#include "MAIN.H" struct SPid vel_Gains[5];
thanks for your reply, i added
struct SPider xhuge vel_Gains;
could someone explain what this means? "If you want the data to reside in xdata, then you'll need to be sure your startup code executes the code in INIT.A51 to actually copy the initializer values from ROM to the xdata RAM. "
could someone explain what this means? Variables live in RAM, so they can vary. RAM does not retain its values when you turn the power off. If you initialize global variables with constants in C: char myArray[] = { 1, 2, 3}; the (RAM) variable myArray has to begin with the constants 1, 2, and 3. But those constants have to be stored in some sort of ROM, rather than RAM, to survive loss of power. That is, they are stored somewhere, in ROM, in addition to the actual variable myArray. Before main() executes, some piece of code has to copy any such constant initializers from ROM to the proper locations in RAM. This job is done in the Keil toolchain by the INIT.A51 code. You may not need this particular feature, so use of INIT.A51 is optional. If you do not link it into your code, but use static initializers anyway, your variables will not be initialized the way you think they will. Have you read this thread: http://www.keil.com/forum/docs/thread4241.asp And the app note it mentions?