I have installed C51 V7.00, µVision 2.30 under W98. My problem is: If I try to translate any 'C' file under µVision2 IDE it don't work (no translation is done.) Project Build, re-buld or 'A51' translation works properly. If I try to translate same 'C' files out of IDE, it works OK. Is there anyone who can advice or hint me. TIA Vaclav Korecek
"Menu: 'Project->Translate file.c'" In my uVision v2.23, the Project->Translate menu item, and the 'Translate' toolbar button are disabled (greyed-out) unless the current editor window contains a translatable file (.c, .a51, etc) To translate a source file without first opening it in an editor window, right-click it in the Project window, and choose 'Translate' from the pop-up menu. Does that help?
"In my uVision v2.23, the Project->Translate menu item, and the 'Translate' toolbar button are disabled (greyed-out) unless the current editor window contains a translatable file (.c, .a51, etc)" In my uVision v2.30 I have disabled Translate items (Pop-Up menu in the Project window or Main roll-down menu) when all source files are closed. (The IDE editor is without any openned "SRC" file). The translate item is activated if any source file is openned in IDE editor and it display the file name and path. I try to translate a 'C' source file if its window is acivated in the uV2 IDE editor. I am afraid but neither pop-up menu nor roll-down menu translation of a single 'C' source in a project don't work on my PC. Keil Support guess: "there seems to be a problem with this option on some computers only. Please let me know which Operating System you are using." I use Win98SE and I can't change it at the moment. Tahnk you, Vaclav.