Hello! Could somebody help me (again)? I programmed a C164 BC-Step with the MEMtool. Something was programmed,but verifying shows a lot of differences (about 800).I looked at the programmed data:there are some parts wich are correct,but are programmed about 20hex behind the address it should... Please answer me if somebody knows something about this!? Thanks a lot hannes
Hello Hannes, you have to recompile your Mon166 with the modifications I suggested and reprogram it into the flash of your EVA board. Then, in the 164 memory space you will see the internal rom, which is not disabled at startup; using the uV2 debugger and simply displaying a memory area (from 0x10000) you will see the internal ROM listed. Look at the 164 user's manual to understand what the ROMEN=1 and ROMS1=1 settings do. If you want to do some experiment, you can even use the Infineon Minimon to read and list the 164 internal ROM. Ciao Bruno