Hello everybody, iam working on cygnal micr0controllers, i have 2 programmes that should run simultaneously is it possible. john e
generating 70khz it should be continuously running That does not require "a task" Using T2 (if your derivative does not have a T2, switch derivative) you can generate a 70khz signal without the program being involved. If your derivative has a PCA the is equally simple> for T2 method see "the bible" ch 3 for PCA method see the PCA cookbook Erik
hello mr erik thanks for your reply.i hope u might understood my reqirements, i have to generate 70khz continuously and it should act as input to the pca as time base. presently iam using ECI EXTERNAL COUNTER INPUT , FOR THIS i have to feed 70khz as input,when i generated continuously 70khz the programme control continuously running at while(1)loop but i have feed either by loop back how it can be implemented, is there any way that i can directly feed scsclk/the value =which is 70khz as input to the pca regards john e
i hope u might understood my reqirements, I do not know if micro (u) "understood your reqirements" why do you ask me. i have to generate 70khz continuously and it should act as input to the pca as time base. Use T0 as the PCA clock Erik