We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
How to burn a large volume of bytes (>40k) into the eprom? I read the previous discussion on creating data-only hex file, http://www.keil.com/support/docs/2070.htm. The problem is that I cannot hard-code the bytes in an array, like,
const code my_bytes[] = { _byte1, _byte2, _byte3 };
It always gives this warning, no matter what address is assigned to /0. Following is an example. Many thanks anyway. Kan
$ bin2hex /O0x00 Act.bin Act_3.hex BIN2HEX Version 1.06 Copyright (c) 1993-1995 BITWARE. All rights reserved. Status: Creating Intel HEX file. Status: Address 0x00000000 exceeds 64K. Status: Writing 9 bytes at address 0x00000100. Status: Writing EOF record. Status: BIN to HEX conversion was successful.
For what it's worth, here's a link to a program that can handle a wide variety of record formats for memory image files, as well as manipulate the files. http://srecord.sourceforge.net/srecord.html
Thanks for the information. cheers, Kan