• State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 22 subscribers
  • Views 3521 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bootstrap XC167

Robert Nugteren

I can't upload my software in bootstrap mode. It seems to be the Keil compiler doesn't recognise the controller.

I think there's something wrong with the monitor...

Parents
  • 0 in reply to Robert Nugteren

    Hi Robert,

    no, unfortunately this is not possible in your case, since the flash driver is based on the OCDS interface.
    ( You have mentioned your PCB does not support OCDS ).
    OCDS I have tested and it works for me since
    V4.27.

    In your case I would kindly ask you to use MEMTOOL,this works with all steps and all XC16x-types.
    ( Provides sectorbased erasing, flashing and verifying )

    I send you a short description with screenshots to your e-mail account.
    It is to use.

    Stefan

Reply
  • 0 in reply to Robert Nugteren

    Hi Robert,

    no, unfortunately this is not possible in your case, since the flash driver is based on the OCDS interface.
    ( You have mentioned your PCB does not support OCDS ).
    OCDS I have tested and it works for me since
    V4.27.

    In your case I would kindly ask you to use MEMTOOL,this works with all steps and all XC16x-types.
    ( Provides sectorbased erasing, flashing and verifying )

    I send you a short description with screenshots to your e-mail account.
    It is to use.

    Stefan

Children
No data