• State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 21 subscribers
  • Views 1151 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problems in saving (and parameter passing ) a 32 bit value in the flash.

Amilcar Peres

I need to save a 32 bit variable to the flash. I am using the In Application Programming.I wrote a code starting from the function "program data byte" (in my case I made program_data_dword).
The problem is that I receive the Warning:
"REFERENCE MADE TO UNRESOLVED EXTERNAL", which means that the cpompiler does not find the code.

I use the registers R4 to R7 to receive the long int value and R3 and R2 to save the address.
Can anyone explain what I doing wrongly?
Thanks.
Amilcar

Here is the code:

; **********************************************************************
; function: iap_program_data_byte
; prototype: unsigned char iap_program_data_byte(unsigned char val, unsigned int addr);
; description: programs a dword in the flash. passed is the byte and the
; 16-bit address. zero is returned for success, non zero is returned for
; failiure.
; **********************************************************************
RSEG ?PR?_iap_program_data_dword?IAP
_iap_program_data_dword:
PUSH IE ; disable interrupts
CLR EA
MOV A,CMOD
MOV R2,A ; store copy of CMOD
JNB ACC.6,?IAPTWDOG ; if watchdog enabled then disable
ANL CMOD,#0BFH
?IAPTWDOG:
ORL AUXR1,#020H ; enable bootrom
MOV R0,iap_freq ; osc frequency
MOV R1,#02H

MOV DPH,R2 ; address to program
MOV DPL,R3

MOV A ,R4 ; data to write
CALL 0FFF0H ; call iap routine
MOV R7,A ; id in accumulator

INC DPTR
MOV A,R5 ; data to write
CALL 0FFF0H ; call iap routine
MOV R7,A ; id in accumulator

INC DPTR
MOV A,R6 ; data to write
CALL 0FFF0H ; call iap routine
MOV R7,A ; id in accumulator

INC DPTR
MOV A ,R7 ; data to write
CALL 0FFF0H ; call iap routine
MOV R7,A ; id in accumulator

ANL AUXR1,#0DFH ; disable bootrom
MOV CMOD,R2 ; restore CMOD (restore watchdog state)
POP IE ; restore interrupts to initial state
RET
; end of iap_program_data_dword

Parents
  • 0 in reply to Amilcar Peres

    void main(void)
    {

    com_config_timer1();
    com_config_serialIO();
    com_baudrate (4800);

    sys_ini();

    while(1)
    {
    while (status != MEM_FREE)
    {
    printf("Memoria ocupada!, Vou passar p o proximo endereco\n");
    addr = addr + INCREM;
    }//if

    status = iap_read_data_byte(addr); }// while (status != MEM_LIVRE)

    iap_program_data_dword(longitude, addr); //armazena
    if (status == 1) printf("Programming sucess!...\n");
    }

Reply
  • 0 in reply to Amilcar Peres

    void main(void)
    {

    com_config_timer1();
    com_config_serialIO();
    com_baudrate (4800);

    sys_ini();

    while(1)
    {
    while (status != MEM_FREE)
    {
    printf("Memoria ocupada!, Vou passar p o proximo endereco\n");
    addr = addr + INCREM;
    }//if

    status = iap_read_data_byte(addr); }// while (status != MEM_LIVRE)

    iap_program_data_dword(longitude, addr); //armazena
    if (status == 1) printf("Programming sucess!...\n");
    }

Children