We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello, I've a receiving problem with the ASC1 serial interface of the XC164 during debugging with ULINK interface. I use the Infineon Starterkit. Transmitting is'nt a problem and if I program the software to flash, and start them without ULINK interface connected, also receiving works. So I believe, it is'nt a problem with register settings. If I use a scope and inspect the signals on JP401, I see a signal, that works against the MAX232 driver. This signal comes from JTAG interface and seems to be the TCK. In documentation of XC164 I red, that these signals are only activ, if the /TRST is asserted. Is there a workaround for this behavior, that I can also use ASC1 during debug process? Steffen
Hi Steffen, thats the right way ! ;-} Cool - I will wrote a SPI-library too, if have some more time, since the timings was very relaxed. But nice feedback, that all works fine for you. Best regards Stefan