We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi.. I switched device from a c167sr to a cx178ci. I used a minimudul before, now I want to use the processor without any module. I changed the start*.a66 file and the device for the target. I am not sure what else I have to change...especially what I have to do in "Options for Target XXX -> Debug" The error message Í use to get is: "C:\KEIL\C166\BIN\A166.EXE" "Start_v2.a66" MODV2 MODV2 MOD167 SET (TINY) DEBUG EP A166 FATAL ERROR - LINE: C:\KEIL\C166\BIN\A166.EXE Start_v2.a66 MODV2 MODV2 MOD167 # ERROR: CONFLICTING CONTROL A166 TERMINATED. Thanks, Holger
As I keep saying, you need to just read the message literally: "CONFLICTING CONTROL" means exactly what it says - (some of) the controls on the command line are in conflict! I'd start by looking up MODV2 and MOD167 in the Manual - does it make any sense to specify both on the same command line?
You have to add to your project Start_V2.A66 instead. For this you need a version C166 4.21 or higher. µV2 will get information for MODV2 from this startup file. So, as Andy says - NO reason to specify MOD167 again. Stefan