Dear Friend, I am working on a LPC932, and am trying to program the device w/ minimal hardware. I don't have any debugging boards EPM900 or whatever. I have tried to mimic the hardware of such a board and enter ISP Bootloader w/ Three pulses to reset method. I plan to do this very soon. In case any of you have already tried it, please let me know. In case you have the schematic of the EPM900 board (compatiable w/ FlashMagic) please let me know. Also, it would be great if you know places where I can get sample board. Your reply will be very helpful in carrying out my low cost academic project as a part of my university degree. Yours Sincerely, Aravindh Krishnamoorthy
Dear Bob, As I am trying for the first time, it would be helpful if you can forward me the code that you have tested and found working. It would be a lot of help. Together, please include any tech details (switch to reload pin) etc, and make it as simple as possible so that I can get it. Your help will go a long way in completion of my degree, here in Bangalore, India. Thanx a lot for the info. My e-mail id is aravindh@softhome.net and you can forward there. Thank you very much. Yours Sincerely, Aravindh Krishnamoorthy
It seems you have a method very similar to my NoTouch for the P89C series. Send me a ping at erikm@digrec.com , maybe you have Ideas I have not considered and vice versa. Erik