Hi all, Could someone please check the following behaviour of uVision 2.31 (C51 7.01)? If in the Options for Target... dialog you switch from the "Target" tab to the "Device" tab and then back to the "Target" tab, some of the options are lost. For example, if the device is a SAB80C517A from Infineon, the "Use On-chip Arithmetic Unit" and "Use On-chip XRAM" check boxes are unchecked. Thanks in advance, Jose
Andrew, Vaclav, I've double checked and I can confirm that the settings are resetted by just clicking the Device tab. It happens in two different installations of the C51 package. In my case, even the Xtal setting is changed to 18.0 from the 16.0 which I use in my project. The off-chip code and xdata memory settings are not changed, by the way. It may happen only with certain Devices, I'll investigate further. Jose