anyone out there..pls help me out!.. im having problems writing a program using uVision2 for a 8052 developement kit. problem no.1: I have a Waveform of unknown freq from a swipe card which has TTL voltage of 0 and 5v. we need to design a program using C to count the time between the very 1st 2 high voltage (1st 2 high V) problem no.2: Next we hav to decode the waveform using a table. Basically its a Magnetic Swipecard we hav to decode, track 2 (eg 411557, 5bits per character) half the program has been written so far but we can;t seem to output it to the LCD display... HELP ME ANYONE PLEASE!!!... Desperate. ps: any qns, pls feel free to email me arelius@visto.com
Hi Erik, well, just looked it up again... you can sure use the internal clock too. I just remembered an old application of mine, where I used a variable external clock to meassure the length of something moving through a light barrier. The external clock was relative to the speed of the movement. So I was not sure, if the c51 would be able to use the internal clock for the capture mode... just too long ago :)) Take care Sven