We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I have the Infineon Easy Utah eval board with C161U installed. I'm at the confused stage... Anyone out there with similar problems? Maybe we could trade answers!
How did this work out? I am looking at the C161U now for a new project.
It has been an up hill struggle. However using the C161U has gotten much better recently. Infineon has posted a set of USB Drivers on their site. These appear to work and I've been able to enumerate my eval board. Also, Keil has their JTAG/OCDS going for the eval board. So far this seems to work very well. I purchased a Windows USB driver from B-Square. The combination of these tools makes getting to the enumeration point relatively simple and direct. I've been working off/on on the C161U for over a year. Things weren't so simple a year ago! Mike
I recently started a project using the C161U on our own board (no eval). Unfortunately the USB driver are not available anymore on the Infineon site. I tried the DAvE tool to create a base driver and for my understanding at least the enumertion should work. But it doesn't. Does anybody can help or provide the drivers from Infineon. Many thanks.