• State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 21 subscribers
  • Views 3135 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Generate "flashable" Intel HEX file

Daniel Sprich

Hallo,

I have uVision2 version 2.06. But I don't know how to create a "flashable" .hex file for my C167CR-LM. In the menu "Project" --> "Options for Target" --> "Output", do I have to set a "Start" and "End" address for creating a hex file? And what should I write in the field "FLASH Fill Byte" and "Offset"? For flashing my Infineon uC, I use Flashtool 16W from Phytec.

Thanks a lot,

Daniel

Parents
  • 0 in reply to Stefan Gemündt

    I use only the very comfortable Flashtool from Phytec. The Microcontroller is from Infineon. I have used the Tasking DOS Compiler which is working almost well. But this Compiler makes problems with math functions like pow(). In the debugging modus of my Keil Compiler everything works well. Only the making of that Intel HEX file doesn't work.

    Daniel

Reply
  • 0 in reply to Stefan Gemündt

    I use only the very comfortable Flashtool from Phytec. The Microcontroller is from Infineon. I have used the Tasking DOS Compiler which is working almost well. But this Compiler makes problems with math functions like pow(). In the debugging modus of my Keil Compiler everything works well. Only the making of that Intel HEX file doesn't work.

    Daniel

Children
No data