We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
My question is: I am going to layout my hardware and bring the serial port out so that the keil debug monitor porgram can run on our owwn hardware. According to the previous discussion, I know that is possible for doing that. My another question is: Does my hardware need to include the PAL and the external RAM which is on the EZ-USB-FX development board? If it is not necessary, how can I relocate the user code so that it loaded into the EZ-USB internal RAM? Thanks
Chris, all you need is an RS232 buffer IC connected to TXD0 & RXD0. That's what I did, of course you may use port 1, too. No ext RAM or PAL needed, where your code resides is a linker issue. Just download such a version of KEIL monitor that uses the same serial port you routed on your PCB. Good luck, Harri