This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

combine two hex file ?

How can I combine two hex files as one to code memory so that the first part starts from 0x0000 and the other one from 0x8000 to 0xFFFF? I use P89C51RD+ and Keil uVision 2. Is it possible to add one hex file to project beside c-code (start from 0x8000) and compile it to one hex file?

Parents
  • How can I combine two hex files as one to code memory so that the first part starts from 0x0000 and the other one from 0x8000 to 0xFFFF?

    Use a TEXT editor to combine the files. Open your editor and load the first file. Delete the following line from the end of the file:

    :00000001FF
    This is the Intel HEX File EOF Record.

    Insert the contents of the second file after the EOF record you deleted.

    Keil Support

Reply
  • How can I combine two hex files as one to code memory so that the first part starts from 0x0000 and the other one from 0x8000 to 0xFFFF?

    Use a TEXT editor to combine the files. Open your editor and load the first file. Delete the following line from the end of the file:

    :00000001FF
    This is the Intel HEX File EOF Record.

    Insert the contents of the second file after the EOF record you deleted.

    Keil Support

Children
No data