SIMULATION vs MONITOR167. PLEASE HELP

Hi there,

I create a project using DAvE and then I import all the files into uVision2.
Then, I develop my program and everything in the Simulation mode works fine.

The problems are starting when I'm trying to debug my application using the
Keil monitor 167. I don't get any output on the serial window and I'm not able to
check changes on the memory window or observe any changes to local variables etc...
In other words, I think that something is really wrong...!

I've tryied many memory and CLASSES combinations but I didn't have any results.

I'm using a Pythec KitCON 167CR with 64kB RAM and 256kB FLASH (16 bit DEMUX, using CS0, CS1)

The settings that I'm using during the simulation debugging are:
----------------------------------------------------------------
ROM: Start 0x00000h, Size 0x40000h
RAM: Start 0x40000h, Size 0x10000h

RESERVE (8H-BH, ACH-AFH)
VECTAB (0X0000)
CLASSES (ICODE (0x0-0xDFFF), NCODE (0x10000-0x1FFFF),
FCONST (0x0-0xDFFF, 0x10000-0x3FFFF), HCONST (0x0-0xDFFF, 0x10000-0x3FFFF),
XCONST (0x0-0xDFFF, 0x10000-0x3FFFF), NCONST (0x4000-0x7FFF),
NDATA (0x40000-0x43FFF), NDATA0 (0x40000-0x43FFF),
SDATA (0xE000-0xE7FF, 0xF600-0xFDFF), SDATA0 (0xE000-0xE7FF, 0xF600-0xFDFF),
IDATA (0xF600-0xFDFF), IDATA0 (0xF600-0xFDFF),
FDATA (0x40000-0x4FFFF), FDATA0 (0x40000-0x4FFFF),
HDATA (0x40000-0x4FFFF), HDATA0 (0x40000-0x4FFFF),
XDATA (0x40000-0x4FFFF), XDATA0 (0x40000-0x4FFFF))
CINITTAB (0x10000-0x3FFFF)

Everything works fine

The settings that I'm using during the monitored debugging are:
---------------------------------------------------------------

RAM: Start 0x00000h, Size 0x10000h
ROM: I don't declare it at all (is that OK?)

RESERVE (8H-BH, ACH-AFH)
VECTAB (0X0000)
CLASSES (NDATA (0x0-0x3FFF), NDATA0 (0x0-0x3FFF),
SDATA (0xC000-0xE7FF, 0xF600-0xFDFF), SDATA0 (0xC000-0xE7FF, 0xF600-0xFDFF),
IDATA (0xF600-0xFDFF), IDATA0 (0xF600-0xFDFF),
FDATA (0x0-0xE7FF), FDATA0 (0x0-0xE7FF),
HDATA (0x0-0xE7FF), HDATA0 (0x0-0xE7FF),
XDATA (0x0-0xE7FF), XDATA0 (0x0-0xE7FF))
CINITTAB (0x10000-0x3FFFF)

And in addition to that I add:

NCODE(0x4000-0x4FFF), NCONST(0x5000-0x5FFF)
?C_INITSEC(200h).



What am I doing wrong? I would really appreciate your help. I'm starting my
3d Year University project and nobody can help me there!! If I don't sort it out
soon I'll find my self into big trouble

Thank you very much

George