• State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 22 subscribers
  • Views 4107 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

About constants

san ts



Can anybody tell me how constants

are stored in a 8051 application.

If it is prom- able to write it to the

PROM and how it will be accessed during

program execution? thanks.


regards,
san

Parents
  • 0 in reply to Keil Support

    Note that excluding the 'code' keyword will put it in RAM:

    // Goes in RAM, not ROM.
const unsigned char tens[] = { 1, 10, 100, 1000, 10000, 100000 };

// Goes in ROM
const unsigned char code tens[] = { 1, 10, 100, 1000, 10000, 100000 };
    Const is an ISO C keyword and C knows nothing of ROM or RAM. Thus const does not imply PROM, just that it is read-only from the compiler's perspective.

    - Mark

Reply
  • 0 in reply to Keil Support

    Note that excluding the 'code' keyword will put it in RAM:

    // Goes in RAM, not ROM.
const unsigned char tens[] = { 1, 10, 100, 1000, 10000, 100000 };

// Goes in ROM
const unsigned char code tens[] = { 1, 10, 100, 1000, 10000, 100000 };
    Const is an ISO C keyword and C knows nothing of ROM or RAM. Thus const does not imply PROM, just that it is read-only from the compiler's perspective.

    - Mark

Children
  • 0 in reply to Mark Odell

    Just to pick a nit however, note that in all of the previous examples, "char" should be changed to "long" to achieve the results implied by the array's initializers.

    --Dan Henry

  • 0 in reply to Dan Henry

    Hehehehehe

    You are right! :-)

  • 0 in reply to Mark Odell

    Hi Mark,

    thank you so much.

    in this case,

    // Goes in RAM, not ROM.
    const unsigned char tens[] = { 1, 10,
    100, 1000, 10000, 100000 };


    where tens will be stored? Whether

    in Heap? or in Stack? or some where

    globally?


    regards,
    san

  • 0 in reply to san ts 

    // Goes in RAM, not ROM. 
const unsigned char tens[] = { 1, 10, 100, 1000, 10000, 100000 };
    Will be stored in the heap, never on the stack because it is outside the scope of a function (I assume). It will exist in DATA if you use the small model and XDATA if you use the large model. Personally, I'd explicitly specify the memory space as CODE or XDATA like this:
    const unsigned char code tens[] = { ... };
    It is global if you do not add the static keyword as in:
    static const unsigned char code tens[] = { ... };
    Static will make it global to the file but not the project. Leaving static off makes it global to the project. Defining 'tens' inside a function makes private to that function. Defining 'tens' inside a { } sequence inside a function makes it visible only inside the { } sequnce. Etc. I suggest you hang out in comp.lang.c as these are all just ISO C questions.

    Regards.

    - Mark

  • 0 in reply to Keil Support

    Good grief, no wonder he's having problems! I didn't even notice this obvious bug.

    - Mark