• State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 25 subscribers
  • Views 6968 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Keil MDK for Cortex-M33 project

Radhika Raghavendran

Hi,

I am trying to build software(esp device driver support) for a particular Cortex-M33 microcontroller offering from my company. I have a few questions about software IDE and tools supported by ARM:

  • Does Keil MDK (uVision) version 5.26.2 support building applications using Cortex-M33 with FPU and TrustZone enabled? I do have a license for MDK uVision.
  • Do you have any reference implementations in Keil CMSIS pack for Cortex-M33 devices? I could not see any CMSIS packs in Keil pack viewer.
  • Does GNU ARM embedded toolchain 2018-q2 release from ARM support Cortex-M33 with FPU and TrustZone? From the release notes I could only check for cortex-m33-nofpu in the options for the release. I could not find trustzone and FPU support. Can you please give me details of the support. The link I used for download is https://developer.arm.com/open-source/gnu-toolchain/gnu-rm 

Regards

Radhika

Parents
  • 0 Arm Employee Badge

    Hi Radhika, Cortex-M33 with FPU and Security Extensions (Trustzone) support were added as early as 2016 (6-2016-q4-major).  It should be available in all subsequent releases up to the latest. The link you mentioned above is the correct link to download the GNU tools from.  I would recommend downloading the latest release (7-2018-q2-update) or wait a couple of weeks more for a gcc-8-based release.

    Thanks.

Reply
  • 0 Arm Employee Badge

    Hi Radhika, Cortex-M33 with FPU and Security Extensions (Trustzone) support were added as early as 2016 (6-2016-q4-major).  It should be available in all subsequent releases up to the latest. The link you mentioned above is the correct link to download the GNU tools from.  I would recommend downloading the latest release (7-2018-q2-update) or wait a couple of weeks more for a gcc-8-based release.

    Thanks.

Children
No data