• Locked Locked
  • Replies 8 replies
  • Subscribers 136 subscribers
  • Views 6517 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

bad performance on 3.8 kernel

Marian Mihailescu
Note: This was originally posted on 18th June 2013 at http://forums.arm.com

Mali 400 on an exynos-based board:

with 3.0 kernel, EGL working fine, with up to 600fps in es2gears

ported drivers to 3.8 kernel, and mali acceleration working, however, the performance is roughly 50%.

I have debugged the issue at the gp job start wrapper - _mali_ukk_gp_start_job, which is called now 50% more times than on the 3.0 kernel...

Here is a comparison between the 2 kernels:

1) with SKIP_GP_JOBS and retuning the job straight away from _mali_ukk_gp_start_job, both 3.0 and 3.8 kernel results in the same number of mali_ioctl calls and the same performance - 650fps in es2gears
2) i modified es2gears to stop after 600 frames and here are my results (from bottom to top):

      GP jobs actually done - calls to "mali_gp_job_start": 299 on 3.0 kernel, 302 on 3.8 kernel
      calls to mali_group_start_gp_job (which calls mali_gp_job_start): 299 on 3.0, 302 on 3.8 kernel
      executions of mali_gp_scheduler_schedule (which calls mali_group_start_gp_job): 299 on 3.0, 302 on 3.8 kernel -- appears as "mali_gp_scheduler_schedule() {" in ftrace
      calls to mali_gp_scheduler_schedule: 0 on 3.0, 299 on 3.8 kernel -- appears as "mali_gp_scheduler_schedule();" in ftrace
     
      system calls served (mali_ioctl) : 960 on 3.0 kernel, 1373 on 3.8 kernel

results: ~600fps on 3.0 kernel, ~380fps on 3.8 kernel

So the conclusion is that the slowdown is due to a much larger number (almost double) of mali_ioctls for MALI_IOC_GP2_START_JOB.

Since I don't have the code for libMali to debug why exactly it's making so many syscalls, I hope somebody here can help me and give me an idea where to look.

A strange thing is the job numbers assigned.
In the 3.0 kernel, they are all multiples of 4, like: Mali GP scheduler: Job 2405 (0xE6581B80) queued; 2409, 2413, 2417, 2421, 2425, ...
In the 3.8 kernel, they increment either by 2, 4 or 6: 8825, 8829, 8833, 8835, 8841, 8843, 8849, 8853, ...
Parents
  • Note: This was originally posted on 5th August 2013 at http://forums.arm.com

    Hi Steve,

    I have looked up that version of the driver and API version 19 does match the userspace libraries, however, unfortunately, the driver is currently only officially supported in linux kernel versions 3.0.15 to 3.5.4 inclusive.

    My best suggestion would be to contact Hardkernel and request support with the integration.

    Kind Regards,
    Rich


    Hi Rich,

    I wasn't able to find mali.ko, but I did see API_VERSION=19 in __malidrv_build_info.c.
    In libMali.so the revision is "Linux-r3p2-01rel0".  I'm seeing the same behaviour as Memeka on 3.8, so I'm guessing we probably have the same drivers.

    Regards,

    Steve
Reply
  • Note: This was originally posted on 5th August 2013 at http://forums.arm.com

    Hi Steve,

    I have looked up that version of the driver and API version 19 does match the userspace libraries, however, unfortunately, the driver is currently only officially supported in linux kernel versions 3.0.15 to 3.5.4 inclusive.

    My best suggestion would be to contact Hardkernel and request support with the integration.

    Kind Regards,
    Rich


    Hi Rich,

    I wasn't able to find mali.ko, but I did see API_VERSION=19 in __malidrv_build_info.c.
    In libMali.so the revision is "Linux-r3p2-01rel0".  I'm seeing the same behaviour as Memeka on 3.8, so I'm guessing we probably have the same drivers.

    Regards,

    Steve
Children
No data