• State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 1215 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fatal error: invalid -march= option: `armv4t'

bradn

when attempting to use arm-none-eabi-gcc I get an "invalid -march=" option error message.  This occurs when no -march option is specified or any of the valid march options are specified.

arm-none-eabi-gcc -c test.c
Assembler messages:
Fatal error: invalid -march= option: `armv4t'

arm-none-eabi-gcc --version
arm-none-eabi-gcc (Arm GNU Toolchain 13.2.rel1 (Build arm-13.7)) 13.2.1 20231009
Copyright (C) 2023 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

arm-none-eabi-gcc was obtained from the following link:

developer.arm.com/.../arm-gnu-toolchain-13.2.rel1-x86_64-arm-none-eabi.tar.xz

I'm using an amd x86 linux RH8 system. I assume it's some sort of setup issue 

Any pointers on how to resolve would be appreciated.  Thanks. 

Parents Reply Children