• State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 21 subscribers
  • Views 5609 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Couldn't build in eclipse by "gcc-arm-none-eabi-10-2020-q4-major-win32"

mian qi 

18:53:27 **** Incremental Build of configuration Debug for project test_NUCLEO_G474RE ****
make all 
Building file: ../system/src/newlib/assert.c
Invoking: GNU Arm Cross C Compiler
arm-none-eabi-gcc -mcpu=cortex-m4 -mthumb -Og -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -ffreestanding -fno-move-loop-invariants -Wall -Wextra  -g3 -DDEBUG -DTRACE -DOS_USE_TRACE_SEMIHOSTING_DEBUG -I"../include" -I"../system/include" -I"../system/include/cmsis" -I"../system/include/DEVICE" -std=gnu11 -MMD -MP -MF"system/src/newlib/assert.d" -MT"system/src/newlib/assert.o" -c -o "system/src/newlib/assert.o" "../system/src/newlib/assert.c"
make: *** [system/src/newlib/subdir.mk:39: system/src/newlib/assert.o] Error -1073741502
"make all" terminated with exit code 2. Build might be incomplete.

18:53:30 Build Failed. 1 errors, 0 warnings. (took 2s.981ms)

I installed gcc-arm-none-eabi-10-2020-q4-major-win32 and eclipse on Windows 10, and I have updated CMSIS package in eclipse, I want to make a test project for NUCLEO-G474RE board, but it couldn't even be built, and propmted:

and, the code at start was shown in console window.

Parents Reply Children