• State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 19 subscribers
  • Views 5361 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

armlink: symdefs generation

Aleph1024
Note: This was originally posted on 19th November 2008 at http://forums.arm.com

Hi all,

I use ARM linker, ADS1.2 [Build 848].
I found some strangeness with generation of the Symbol Definitions file.
So, what I do, step by step (with CodeWarrior):

1. Project->Remove Object Code
2. Make
The symdefs file is created, and 89 global symbols are written to the symdefs file.
After that I repeat:
3. Project->Remove Object Code (symdefs file is not deleted automatically).
4. Make
The symdefs file is rebuilt, but only 67 global symbols have been remained in the symdefs file.

As I change nothing, just rebuild the project, I expect that the number of global symbols must not be changed, and as a result the symdefs file should be identical to the previously created.

Please, could somebody explain me where I am wrong? And, what do I have to do to avoid this problem?

Thank you,
Alexandre.
Parents
  • 0
    Note: This was originally posted on 27th November 2008 at http://forums.arm.com

    Hello, arunjr,

    thank you for interest! If I remember exactly, I was trying -feedback, but unfortunately ARM linker from ADS1.2 [Build 848] does not support it  :)  . Anyway I will look precisely at this poit tomorrow, and will try to suppress all optimization.

    Thanks.
Reply
  • 0
    Note: This was originally posted on 27th November 2008 at http://forums.arm.com

    Hello, arunjr,

    thank you for interest! If I remember exactly, I was trying -feedback, but unfortunately ARM linker from ADS1.2 [Build 848] does not support it  :)  . Anyway I will look precisely at this poit tomorrow, and will try to suppress all optimization.

    Thanks.
Children
No data