• Locked Locked
  • Replies 4 replies
  • Subscribers 119 subscribers
  • Views 3574 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ARMv6: "invalidate D-cache line" instruction doesn't work?

Zhanguo Li
Note: This was originally posted on 10th November 2011 at http://forums.arm.com

I am trying to test the "invalidate D-cache line" instruction of Freescale imx31/35 processor(ARMv6) and seems that it fails to work.

Below are my test pseudocode:
1. pBuf = malloc(xxx) /* alloc a write-back memory */
2. *(volatile char *)pBuf = 0; /* not cache  hit now and not write-allocate, so 0 is written to memory */
3. data = *(volatile char *)pBuf; /* read the date to cache */
4. *(char *)pBuf = 0xaa; /* write 0xaa to cache */
5. invalidate pBuf cache line; /* via mcr or mcrr instruction */
6. data = *(volatile char *)pBuf; /* read it again */
7.  data should not be 0xaa, otherwise the invalidate instruction does not work.

Note that my real test code are more strict than the pseudocode, and it works well in ARMv7 platform

So is there knowd issue for ARMv6 "invalidate D-cache line" instruction?

Thanks a lot!
-Jerry


Parents Reply Children
No data