This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Is RTSM A9 uart interrupt ok?

Note: This was originally posted on 15th August 2011 at http://forums.arm.com

I run sample code 'SW012-SW-00000-r1p0-00rel0.zip' on RTSM CortexMPCore, uart interrupt does not generate after inputs a command.
The sample code has a uart console. Uart input is processed in interrupt. First command input is ok, but after that, input is hung up.
If not using uart interrput, input and output is ok.
Parents Reply Children
No data