This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bootloader problem in ARM926ejs

Parents
  • Note: This was originally posted on 27th June 2011 at http://forums.arm.com

    I am still gathering clues:
    It seems that the __iar_data_init2 in initarm.s79 that should be initializing the .data section is not working properly (it didn't initialize anything).
    Still searching why.
    Still couldnt confirm if the MMU is completely properly set (but it seems OK now that all entries are 1MB aligned).
Reply
  • Note: This was originally posted on 27th June 2011 at http://forums.arm.com

    I am still gathering clues:
    It seems that the __iar_data_init2 in initarm.s79 that should be initializing the .data section is not working properly (it didn't initialize anything).
    Still searching why.
    Still couldnt confirm if the MMU is completely properly set (but it seems OK now that all entries are 1MB aligned).
Children
No data