• Locked Locked
  • Replies 3 replies
  • Subscribers 119 subscribers
  • Views 7189 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cannot enter Debug Mode

Ahmad Agbaria
Note: This was originally posted on 5th April 2011 at http://forums.arm.com

Hi

when downloading to the LM3s8933 microcontroler i get this message "Cannot enter Debug Mode"
is any one know whats the problem.

best regards.
Parents
  • Note: This was originally posted on 6th April 2011 at http://forums.arm.com

    [color=#333333][font=Verdana][size=2]Hi[/size][/font][/color]
    [color=#333333][font=Verdana][size=2]Im working with LM3S8933 microcontroler in my own bord i using the keil development tool with uv4 editor and ulink 2 debugger.[/size][/font][/color]
    [color=#333333][font=Verdana][size=2]The bord working in 8MHz frequency.[/size][/font][/color]
    [color=#333333][font=Verdana][size=2]I succeed to download the programm in the first time, but after the first time i get the error messages "Cannot enter Debug Mode" and "cannot access memory". thank's.[/size][/font][/color]
    [size=2]debug hardware setup is JTAG.[/size]
    [size=2]
    [/size]
    Thank's

    [color=#333333][font=Verdana][size=2][/size][/font][/color]

    You need to give more information:
    Which toolchain? which debug hardware? Setup as JTAG or Serial wire? Have you try reducing the debug clock frequency? Is the flash programming working at all?
    It can be caused by many different factors. E.g.
    - debug pins blocked by I/O usage
    - incorrect PLL settings
    - issues with voltage level on debug pins



Reply
  • Note: This was originally posted on 6th April 2011 at http://forums.arm.com

    [color=#333333][font=Verdana][size=2]Hi[/size][/font][/color]
    [color=#333333][font=Verdana][size=2]Im working with LM3S8933 microcontroler in my own bord i using the keil development tool with uv4 editor and ulink 2 debugger.[/size][/font][/color]
    [color=#333333][font=Verdana][size=2]The bord working in 8MHz frequency.[/size][/font][/color]
    [color=#333333][font=Verdana][size=2]I succeed to download the programm in the first time, but after the first time i get the error messages "Cannot enter Debug Mode" and "cannot access memory". thank's.[/size][/font][/color]
    [size=2]debug hardware setup is JTAG.[/size]
    [size=2]
    [/size]
    Thank's

    [color=#333333][font=Verdana][size=2][/size][/font][/color]

    You need to give more information:
    Which toolchain? which debug hardware? Setup as JTAG or Serial wire? Have you try reducing the debug clock frequency? Is the flash programming working at all?
    It can be caused by many different factors. E.g.
    - debug pins blocked by I/O usage
    - incorrect PLL settings
    - issues with voltage level on debug pins



Children
No data