This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VFPv2 support for Windows CE

Note: This was originally posted on 29th March 2011 at http://forums.arm.com

Hi all,

am new to this forum and I have see several threads about VFPv2 support for Windows CE 6 but I haven't been able to figure out where I can download that support or how to implement it in a BSP.

Can someone tell me where to get this information?

We use an Cortex-A8 (i.MX51) chip.

Thanks,
--
Mike E
Parents
  • Note: This was originally posted on 30th March 2011 at http://forums.arm.com

    Hi Alban,

    thanks for your information. I will have a look on that link.

    There are quite a lot of information on how the VFP support have to implemented under Windows CE 6 but the problem is that I cannot find the offical ARM support including the FPCRT.dll and information to implement it under Windows CE 6 OAL. All the links to the library and Dll are broken so far. i will keep on searching and hope I can find something.

    Thanks,
    --
    Mike
Reply
  • Note: This was originally posted on 30th March 2011 at http://forums.arm.com

    Hi Alban,

    thanks for your information. I will have a look on that link.

    There are quite a lot of information on how the VFP support have to implemented under Windows CE 6 but the problem is that I cannot find the offical ARM support including the FPCRT.dll and information to implement it under Windows CE 6 OAL. All the links to the library and Dll are broken so far. i will keep on searching and hope I can find something.

    Thanks,
    --
    Mike
Children
No data