• Locked Locked
  • Replies 6 replies
  • Subscribers 118 subscribers
  • Views 4219 views
  • Users 0 members are here
Options
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

cycle penality before using a register as pointer

Etienne SOBOLE
Note: This was originally posted on 28th January 2011 at http://forums.arm.com

Hi.

it seem's that you can't use a modified register as a load address directly in the next cycle (with the Cortex A8)


For example

ADD   r0, r0, #16
LDR   r1,[r0]


will not execute in 2 cycles but in 3 cycles.
I'm looking in the ARM documentation where this penality cycle is explain but I do not find !!!

If I simply use the cortex A8 cycle table:
ADD will write his result in E2
while LDR will need R0 in E1

So If I just apply those rules, the 2 instructions should execute in 2 cycles.

So !!! Does anybody can tell me where this pipeline-dependent latency is explain (or simply notify) ?

Thank's
Parents Reply Children
No data