Arm Development Studio forum Seeking DS-5 configdb platform entry for AST25xx EVB

State Not Answered
Locked Locked
Replies 1 reply
Subscribers 121 subscribers
Views 4302 views
Users 0 members are here

2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Seeking DS-5 configdb platform entry for AST25xx EVB

dthompso_98 over 8 years ago

I am using DS-5 along with DSTREAM probe to develop software on an AST25xx EVB.

I am looking to get the configuration database files for this board, including proper

configuration files to enable flash programming. I spoke with the vendor ASPEED, but

apparently they don't use DS-5/DSTREAM so they could not provide assistance.

Has anyone developed a working configuration set for this EVB, or could give me

pointers for how to get it?

0 Elizabeth Weidmann over 8 years ago

DS-5 does not support this board out of the box so you will need to create a platform configuration for it with the PCE tool in order to connect and debug the board with DS-5.

Steps on how to use PCE can be found at

developer.arm.com/.../soc-bring-up-using-the-platform-configuration-editor-pce

PCE does not provide flash programming support for a board. To get flash programming, you will need to use the "flash" examples in the "<DS-5 installation directory>\examples\docs" folder as a base to create your own flash programming algorithm.
Cancel
Vote up 0 Vote down

Cancel