• Locked Locked
  • Replies 5 replies
  • Subscribers 119 subscribers
  • Views 3700 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RVI ICE box can't connect to target.

Xuewen He
Note: This was originally posted on 25th August 2010 at http://forums.arm.com

As we know, JTAG connect target by TDI/TMS/TCK/TDO/nTRST pin in general.
Now I try ICE box to connect target failed, but TDI/TMS/TCK/TDO/nTRST pin is fine because I can connect target successfully by JLink.
So I want to know whether other pins of JTAG cable port cause connection failed? In my board, the pins 11/17/19/2 are floating. They are RTCK/DBGRQ/DBGACK/Vsupply.

And how will I modify the board to let ice box work well?

Any comment will be great appreciated.
Xuewen
Parents
  • Note: This was originally posted on 25th August 2010 at http://forums.arm.com

    Thank you, Joseph,

    But I am using cortex-M3; both JTAG and SWD work well with IAR/J-Link, but still fail by ICE box.

    Now the configuration of JTAG port is following:

    1 VTref  ---- VCC
    3 nTRST ---- pull-up
    5 TDI  ---- pull-up
    7 TMS ---- pull-up
    [color="#FF0000"]9 TCK ---- pull-up (also tried pull-down)
    11 RTCK ---- floating ( tried to connect with TCK)[/color]
    13 TDO ---- no pull-up or pull-down
    15 nSRST ---- pull-up
    [color="#FF0000"]17 DBGRQ ---- floating
    19 DBGACK ---- floating[/color]

    2 Vsupply ---- pull-up to VCC
    4,6,8,10,12,14,16,18,20 ---- GND

    Do you think whether something wrong with the set of JTAG port?

    Best Regards.

    Xuewen
Reply
  • Note: This was originally posted on 25th August 2010 at http://forums.arm.com

    Thank you, Joseph,

    But I am using cortex-M3; both JTAG and SWD work well with IAR/J-Link, but still fail by ICE box.

    Now the configuration of JTAG port is following:

    1 VTref  ---- VCC
    3 nTRST ---- pull-up
    5 TDI  ---- pull-up
    7 TMS ---- pull-up
    [color="#FF0000"]9 TCK ---- pull-up (also tried pull-down)
    11 RTCK ---- floating ( tried to connect with TCK)[/color]
    13 TDO ---- no pull-up or pull-down
    15 nSRST ---- pull-up
    [color="#FF0000"]17 DBGRQ ---- floating
    19 DBGACK ---- floating[/color]

    2 Vsupply ---- pull-up to VCC
    4,6,8,10,12,14,16,18,20 ---- GND

    Do you think whether something wrong with the set of JTAG port?

    Best Regards.

    Xuewen
Children
No data