• Locked Locked
  • Replies 2 replies
  • Subscribers 119 subscribers
  • Views 2786 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RVD ICE CM3 ROM Table

Rythums Swar
Note: This was originally posted on 16th June 2010 at http://forums.arm.com

Hi,

I am trying to work with a CM3 implemented in Xilinx FPGA and I am trying to connect it through RVD ICE.
I do not want to connect it through CoreSight Modules as the my CM3 core does not have it.

But I want to connect to CM3 ROM table directly, or else I want to add CM3 as a device manually but in the Add device Menu I see the Cortex Tab in the registered devices disabled.

Can anybody suggest any solution ...?

-ryth
Parents
  • Arm Employee Badge
    Note: This was originally posted on 18th June 2010 at http://forums.arm.com

    Hi there,
    Not sure what you mean by "my CM3 core does not have it (CoreSight Modules)".
    The Cortex-M3 design included the SWJ-DP and ROM table, so unless it has been removed by the designer, you should be able to access it easily.
    I would suggest you to contact ARM support team so that we can understand what system design configuration you are using and see what can be done to resolve the problem.
    regards,
    Joseph
Reply
  • Arm Employee Badge
    Note: This was originally posted on 18th June 2010 at http://forums.arm.com

    Hi there,
    Not sure what you mean by "my CM3 core does not have it (CoreSight Modules)".
    The Cortex-M3 design included the SWJ-DP and ROM table, so unless it has been removed by the designer, you should be able to access it easily.
    I would suggest you to contact ARM support team so that we can understand what system design configuration you are using and see what can be done to resolve the problem.
    regards,
    Joseph
Children
No data