This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Design security model using ARM11 trust zone

Note: This was originally posted on 19th January 2010 at http://forums.arm.com

Hi all,

I am a very new user on the ARM11 trustzone.
My fist concern is - how should I start in designing the security model utilizing the trustzone?
I've decided to use RTOS in my development, is there any step by step procedure. ( integrate the os image with the interupt handler and secure monitor software).
Hope some one can guide me.
Thank you

Parents

Swati Prasad over 12 years ago

Note: This was originally posted on 17th September 2010 at http://forums.arm.com

Hi

Do you have any project using TrustZone? Can you share ? I am able to find Linux rtos with trust zone but not able to find with rtos vxWorks.

TrustZone is independent of Host Operating System, so it should work with xWorks host rtos?
Cancel
Vote up 0 Vote down

Cancel

Reply

Swati Prasad over 12 years ago

Note: This was originally posted on 17th September 2010 at http://forums.arm.com

Hi

Do you have any project using TrustZone? Can you share ? I am able to find Linux rtos with trust zone but not able to find with rtos vxWorks.

TrustZone is independent of Host Operating System, so it should work with xWorks host rtos?
Cancel
Vote up 0 Vote down

Cancel

Children

No data