This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WatchDog Reset.

Note: This was originally posted on 18th November 2009 at http://forums.arm.com

[font="Times New Roman"]
[size=3]
I want to know the sequence of steps involved (if any), required to Debug a WatchDog Reset on a phone having ARM9. With/without it, a detailed explanation of the process like the registers that I 've to watch and TCBs that I need to look out for etc. would be really great and helpful.
Also, if somebody can shed some light on any ARM Document which details this fact would be really great.
[/size]
[/font]
Parents
  • Note: This was originally posted on 30th November 2009 at http://forums.arm.com

    WatchDog functionality is part of the SoC not the uC...
    Generally, the WatchDog registers are very few and
    simple to use. You can not debug it as a normal step,
    because it resets the uC...

    Yes, I'm aware of the fact that a WatchDog Reset cannot be debugged using normal stepping. Hence, I require the procedure to Debug WatchDog Crashes.
Reply
  • Note: This was originally posted on 30th November 2009 at http://forums.arm.com

    WatchDog functionality is part of the SoC not the uC...
    Generally, the WatchDog registers are very few and
    simple to use. You can not debug it as a normal step,
    because it resets the uC...

    Yes, I'm aware of the fact that a WatchDog Reset cannot be debugged using normal stepping. Hence, I require the procedure to Debug WatchDog Crashes.
Children
No data